english Installation Guide
High Speed Shallow Flotation Device - Comprehensive Installation Procedure
Pre-Installation Site Requirements
- Flat and Stable Surface: The installation area must be level and capable of supporting the device's weight.
- Adequate Space: Sufficient room for both operation and future maintenance activities.
- Hazard-Free Environment: Surrounding area should be clear of potential hazards that could impact installation or operation.
- Component Verification: All device parts must be checked for completeness before installation.
- Clean Installation Surface: Removal of debris and impurities to ensure even placement.
Installation Steps
Site Preparation
Conduct comprehensive site inspection to verify all requirements are met. Clean the installation surface thoroughly to remove any debris or impurities.
Component Preparation
Prepare all necessary installation components and tools. Verify that all flotation device parts are intact and complete, including main body, pipeline connections, and auxiliary components.
Main Body Placement
Position the main body accurately according to design requirements. Ensure the device is perfectly level to prevent operational issues. Secure it firmly to the installation base.
Pipeline Connection
Connect all pipelines including inlet, outlet, and reagent feeding lines. Ensure tight, sealed connections using appropriate sealing materials to prevent leaks.
Inspection & Testing
Conduct thorough inspection of all connections, fasteners, and seals. Perform test run to verify operation, checking for abnormal noises or vibrations.
Important Note
All installation steps must be completed sequentially and verified before proceeding to the next stage. Make necessary adjustments during test run to ensure stable and efficient operation before formal use. Leak prevention is critical for both efficiency and environmental protection.
